NSF CERTIFIED UL LISTED WQA GOLD SEAL US EPA* Microbiological Water Purifier Standard * innowave® 240/270, 270H and UVF ONLY

Broward Testing Labs Test Results March 18, 1997
University of Arizona  |  Broward Labs  |  Midwest Labs

innowave 240/270® Evaluation for Removing Contaminants from Drinking Water Test Parameters • The innowave 240/270® was tested to determine 3 key parameters:    1. Effectiveness of chemical reduction    2. Contaminant extractability    3. Establish flow rate capability • Each test was conducted using ANSI/NSF Standard 62 protocol • Analyses of contaminates were performed using US EPA methods

Test #1 The innowave 240/270® system removed >99% of inorganic contaminants including: • Arsenic • Copper • Nitrate • Chromium • Mercury • Cadmium • Lead • Barium • Fluoride • Selenium

Test #2 The innowave 240/270® confirmed its effectiveness in extracting contaminates. None of the following were detected at or above the detection limit. • Copper • Mercury Nickel • Chromium • Phenols • Chloroform • Bromoform • Trichloroethylene • Vinyl Chloride • Dichloroethane • Lead • Antimony • Cadmium • Bromodibromomethane • Chlorodibromomethane • Carbon tetrachloride • Tetrachloroethylene • Methylene Chloride • Methylene Chlorid

Test #3 • The production rate of the innowave 240/270® was verified at 1.10 liters (about 1/3 gallon) per hour

Broward Lab Conclusions • The innowave 240/270® removes in excess of 99% of all contaminants • It effectively reduces chemicals • The system effectively extracts contaminants

2550 Barrington Ct. Hayward, CA 94545 1-510-723-0230